How to remove your heater/temperature sensor once the Boron Nitride Paste has dried?

If you are reading this article, odds are that you are trying to remove your heater or temperature sensor from your hot block. If you add Boron Nitride Paste into the mix, you might feel like your components are permanently stuck in the hot block. Luckily, we have some techniques/tools to remove your components:

For Temperature Sensors:

Use an Allen key about the size of your temperature sensor and try to lightly tap the sensor out.

For Heaters:

For the heater, we have a printable Heater Unseater that you can use to remove the heater. To use the Heater Unseater simply print it, grab it (with pliers) and unseat it.