Quick how to import our specific profile for our filament for your slicer that we support.
Our Profile for our materials:
If you have further questions, please contact us.
Note: Profile Bundle (Include all our materials/printed profiles that printer), Individual profile only include one set of materials/filament/printer config.
TABLE OF CONTENTS
- Orca Slicer (Import Profile Bundles)
- Bambu Slicer (Import Profile Bundles)
- Super Slicer [Individual Profiles]
- Prusa Slicer [Individual Profiles]
Orca Slicer (Import Profile Bundles)
Video:
Written Guide:
1. Click on the file (on the top left corner of the application)
2. Under Import -> Import Configs
3. Find the directory of the configuration you downloaded, in most case it will be in your default downloads folder.
4. If you have originally imported on profile and wish to use our latest you will need to select overwrite existing profile, but in most case our profile apart from initial release will profile revision number so this prompt should not occur if its your first time import. In most case it will show import successful show a number of profile imported. In future, for any new profile you should repeat the process but if you overwrite with new updated profile if you made any changes it will overwrite, so if you plan to make any changes, we suggest changing the print/materials to new name.
Bambu Slicer (Import Profile Bundles)
Video Guide:
Written Guide: [Coming Soon]
1. Click on the file (on the top left corner of the application), Under Import -> Import Configs
3. Find the directory of the configuration you downloaded, in most case it will be in your default downloads folder.
4. If you have originally imported on profile and wish to use our latest you will need to select overwrite existing profile, but in most case our profile apart from initial release will profile revision number so this prompt should not occur if its your first time import. In most case it will show import successful show a number of profile imported. In future, for any new profile you should repeat the process but if you overwrite with new updated profile if you made any changes it will overwrite, so if you plan to make any changes, we suggest changing the print/materials to new name.
Depending on how many profile contains, it should be higher than 1 configuration imported. If you have issue not finding the profile, you may need add printer into your printer list, our profile is based on stock printer profile and using 0.4mm unless specific in profile name.
Super Slicer (Individual Profiles)
Video: [Coming Soon]:
Written Guide:
1. Click on the file (on the top left corner of the application)
2. Under Import -> Import Configs
3. Find the directory of the configuration you downloaded, in most case it will be in your default downloads folder.
4. Once imported you can view the slicer changes and compare to with your existing print profile.
Prusa Slicer (Individual Profiles)
Video: [Coming Soon]
Written Guide:
1. Click on the file (on the top left corner of the application)
2. Under Import -> Import Configs
3. Find the directory of the configuration you downloaded, in most case it will be in your default downloads folder.
4. Once imported you can view the slicer changes and compare to with your existing print profile.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article