Install Manual (For Custom Printers): https://github.com/CrealityOfficial/Creality_Sonic_Pad/blob/main/docs/%E5%9B%BA%E4%BB%B6%E7%BC%96%E8%AF%91%E6%8C%87%E5%AF%BC%E4%B9%A6-20220919.pdf (If you have spare raspberry pi or linux base system or vm you can also use official klipper install guide (https://www.klipper3d.org/Installation.html).
Downloads: https://www.creality.com/pages/download-creality-sonic-pad
Source: https://github.com/CrealityOfficial/Creality_Sonic_Pad
FAQ
If using type C mainboards, we suggest not to use provided micro B to Type C adpater, please supply your own Type C cable to ensure connection mainboard is stable during higher speed printing. You can apply small amount of hotglue to keep connection secure.
Official Printer/Mainboard Supported Configurations:
| Printer | Mainboard MCU / Mainboard Version |
| Ender 3 S1 | STM32F401 |
| Ender 3 S1 | STM32F103 |
| Ender 3 S1 Pro | STM32F401 |
| Ender 3 S1 Pro | STM32F103 |
| Ender 3 V2 ABL CR Touch/Bl Touch | V4.3.1 / V4.2.2 |
| Ender 3 V2 Stock | V4.3.1 / V4.2.2 |
| Ender 3 V2 ABL CR Touch/Bl Touch | V4.2.7 |
| Ender 3 V2 Stock | V4.2.7 |
| Ender 3 V2 Neo | STM32F103 |
| Ender 3 Max | STM32F103RET6 (GD32F303RET6) |
| Ender 3 Pro | STM32F103RET6 (GD32F303RET6) |
| Ender 3 Pro ABL CR Touch/Bl Touch | STM32F103RET6 (GD32F303RET6) |
| Ender 3 Pro (8bit board) | ATMEGA1284P |
| Ender 3 S1 Plus | STM32F401 |
| CR10 Smart | STM32F103RET6 (CRC-2405V1.2) |
| CR10 Smart | STM32F103RET6 (CR-FDM-v2.5.S1_100) |
| CR10 Smart | STM32F401RET6 (CR-FDM-v2.5.S1_100) |
| CR10S Pro V2 (8bit board) | ATMEGA2560 |
| CR10 V3 (8bit board) | ATMEGA2560 |
| Ender-5 Pro | |
| Ender-5 S1 | |
| Ender-6 | |
| Ender-7 | |
| Ender-5 Plus |
Changelog History:
https://www.reddit.com/r/SonicPadCreality/comments/12qr5p6/sonic_pad_release_notes_download_links/
Notable Changes:
v1.0.6.35.154 (Added support for Ender 5 Series/ Ender 6/Ender7)
v1.0.6.43.51 (SSH root login information viewable within settings)
V1.0.6.46.25 (Added M600 filament command, may require re-configurations not important if you already setup M600 macro already)
We only offer support for klipper install for supported printers listed by Creality, if you need help installing on custom mainboard/ other printer please contact support for consulting quote of your needs and requirement.
Install/Overview Video:
Video Timestamp
2:05 Initial setup
9:54 Setting up Cura with Sonic Pad. Fast profiles
10:32 Input shaping - measuring resonance
14:37 Tuning pressure advance for for better looking prints - worth doing!
15:15 Switching back to original firmware
Some Popular Sonic Pads Mods:
https://www.thingiverse.com/thing:5671208 (Sensor Bracket)
https://www.printables.com/model/332077-creality-sonic-pad-sensor-bracket-y-axis (Sensor Bracket for bed (Y Axis) )
https://www.thingiverse.com/thing:5554935 (Top Mount for S1/S1 Pro)