EBB36 / EBB42 / EBB SB 2240 / 2209 Documentation

Modified on Sun, 6 Oct at 10:42 AM

Note: for SB included CAN cable cable is tinned, we recommended cutting off tinned and re-crimping with ferrules or use bare wire.

TABLE OF CONTENTS

Video Guide:
Written Guides
- Flash Guide
Pin Out:
Voron SB Build Guide:
Troubleshooting

Where to buy:

EBB SB2209/SB2204: https://store.dremc.com.au/products/bigtreetech-ebb-sb2209-can-v1-0-for-voron-stealthburner

EBB36/EBB42/U1C: https://store.dremc.com.au/products/bigtreetech-ebb-36-42-can-bus-for-connecting-klipper-expansion-device

Video Guide:

Written Guides

Btt Documentation Github: https://github.com/bigtreetech/EBB (Klipper Configuration Example and pre-flashed bin)

See below attached PDF for written guide EBB32 / EBB42. The setup process between 1.2/1.0 is same, just note the different IO layout.

EBB SB2240/SB2209 Documentation:

https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2240_2209%20CAN/Build%20Guide

Alternative Github CanBus Guide/Troubleshooting: https://canbus.esoterical.online/ (Credit: https://github.com/Esoterical)

Board Pinout (Please double check if you have V1 or V1.2 by checking the note on packaging) (All DREMC EBB36/42 boards is 1.2 version)

Flash Guide

Toolhead Board:

https://canbus.esoterical.online/toolhead_flashing/common_hardware.html

CanBoot Bridge (Mainboard/U1C):

https://canbus.esoterical.online/mainboard_flashing/common_hardware.html

Pin Out:

EB36 V1.0 / EB36 V1.1/1.2

BB36 CAN V1.1 and V1.2

EBB42 CAN V1.1 and V1.2

EBB SB2209 (RP2040)

EBB SB 2209

EBB SB 2204

Voron SB Build Guide:

https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2240_2209%20CAN/Build%20Guide

Troubleshooting

https://canbus.esoterical.online/troubleshooting.html

Attachments (1)

pdf

How_to_Use_C....pdf
2.97 MB