This firmware from the community (Youtuber Kersey Fabrications) A special thanks for him pre-compling the firmware for the community.
Product Listing (Store Link)
Note: BL Touch/CR Touch (You need to re-pin the connector) for Ender 5 Plus Stock Wiring Loom (Otherwise, if you using CR/BL Touch kit with 5 wire pin its plug and play).
https://youtu.be/VAXY3GkgTyY?si=eFM8KDSJqUqd0dvJ&t=687
Install and Overview Video:
KF Firmware ( This is only provided as guide, make sure you select correct firmware)
- SKR Mini E3 V3.0 - Ender 5 - BLTouch - BLTouch connected to Probe - https://drive.google.com/file/d/1sf8I...
- SKR Mini E3 V3.0 - Ender 5 Plus - BLTouch connected to Z endstop -https://drive.google.com/file/d/1TIa6...
- SKR 2 (F429) - Dual Z - TMC2208 - Ender 5 Plus - BLTouch connected to Probe - https://drive.google.com/file/d/1RKD_...
- SKR 2 (F429) - Dual Z - TMC2209 - Ender 5 Plus - BLTouch connected to Probe - https://drive.google.com/file/d/1UNsv...
- SKR 2 (F407) - Dual Z - TMC2208 - Ender 5 Plus - BLTouch connected to Probe - https://drive.google.com/file/d/1GqWi...
- SKR 2 (F407) - Dual Z - TMC2209 - Ender 5 Plus - BLTouch connected to Probe - https://drive.google.com/file/d/1OMUg...
- SKR E3 Turbo - Ender 5 Plus - BLTouch connected to Z endstop - https://drive.google.com/file/d/1Rv2s...
- SKR V1.4 Turbo - Dual Z - TMC2208 - Ender 5 Plus - BLTouch connected to Z endstop - https://drive.google.com/file/d/1K_HC...
- SKR V1.4 Turbo - Dual Z - TMC2209 - Ender 5 Plus - BLTouch connected to Z endstop - https://drive.google.com/file/d/1pu1t...
- SKR Mini E3 V2.0 - Ender 5 Plus - BLTouch connected to Z endstop - https://drive.google.com/file/d/1h3XO...
All source can be found here: https://github.com/KerseyFabrications... Select the branch you need from the drop down.
If you need a custom configuration, please contact support team for consulting and quote for custom firmware.