Comparing a standard 0.6 Volcano nozzle with a 0.6 CHT Volcano nozzle
Product Listing:
https://store.dremc.com.au/products/bondtech-cht%C2%AE-v6-vol-volcano-m6-coated-brass-nozzle
| Room Temperature | 20 - 25 °C |
| Material | HT-PLA |
| Manufacturer | add:north |
| Vref ( current ) | ( 500mA ) |
| Extruder | LGX 1.75 |
| Arm Position | 0 1 2 3 4 5 |
| Motor | LDO Nema17 |
| Hotend | E3D Volcano |
| Nozzle | 0.6mm CHT |
| Nozzle ( °C ) | Feed Rate | Flow Rate (mm^3/s) |
| 200 °C | 650 | 26.06 |
| 210 °C | 810 | 32.47 |
| 220 °C | 910 | 36.48 |
| 230 °C | 1090 | 43.70 |
| 240 °C | 1175 | 47.10 |
| 250 | 1250 | 50.11 |
| 260 °C | 1360 | 54.52 |
| 270 °C | 1450 | 58.13 |
| 280 °C | 1580 | 63.34 |
add:north recommended temperature for HT-PLA: 200 - 230 °C
| Room Temperature | 20 - 25 °C |
| Material | HT-PLA |
| Manufacturer | add:north |
| Vref ( current ) | ( 500mA ) |
| Extruder | LGX 1.75 |
| Arm Position | 0 1 2 3 4 5 |
| Motor | LDO Nema17 |
| Hotend | E3D Volcano |
| Nozzle | 0.6mm Standard |
| Nozzle ( °C ) | Feed Rate | Flow Rate (mm^3/s) |
| 200 °C | 520 | 20.85 |
| 210 °C | 585 | 23.45 |
| 220 °C | 630 | 25.26 |
| 230 °C | 705 | 28.26 |
| 240 °C | 750 | 30.07 |
| 250 °C | 810 | 32.47 |
| 260 °C | 865 | 34.68 |
| 270 °C | 910 | 36.48 |
| 280 °C | 960 | 38.48 |
add:north recommended temperature for HT-PLA: 200 - 230 °C
Bondtech CHT Volcano Flow Rate Gains
| ( °C ) | ( mm^3/s ) | ( % ) |
| Nozzle Temperature | Absolute Increase | Relative Increase |
| @ 200 °C | + 5.21 | + 25% |
| @ 210 °C | + 9.02 | + 38% |
| @ 220 °C | + 11.22 | + 44% |
| @ 230 °C | + 15.43 | + 55% |
| @ 240 °C | + 17.04 | + 57% |
| @ 250 °C | + 17.64 | + 54% |
| @ 260 °C | + 19.84 | + 57% |
| @ 270 °C | + 21.65 | + 59% |
| @ 280 °C | + 24.85 | + 65% |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article